System Data Cleaner

Menu bar app for developer Macs

Find the dev junk hiding in your Mac's System Data

A tiny menu bar app that watches the 81 places where Xcode, simulators, AI coding agents and package managers leave files they never clean up. It shows how much is sitting on your disk and how fast it grows, then clears it with one click once you confirm.

Coming in NovemberSee what it watches
  • macOS 14 or later
  • Deletes nothing without your OK
  • No account
Example on a 494 GB dev Mac with 19 GB free.

The problem

System Data isn't macOS. It's your dev tools.

Open System Settings, then General, then Storage on any developer Mac. System Data is huge, and it keeps growing. On a dev Mac most of it is build output, simulators and caches that no tool ever cleans up.

62%

System Data

None of these tools clean up after themselves. macOS only clears $TMPDIR at startup, so a Mac that sleeps instead of restarting never gets cleaned. The gray bar just grows.

10–100 GB

Xcode DerivedData

One build folder per project and per clone, never removed.

5–150 GB

Simulator devices

Every simulator keeps its apps, caches and photos forever.

10–100 GB

Docker.raw

A disk image that grows with every image and volume and never shrinks.

14.7 GB on one Mac

AI agent scratchpads

Recordings, frames and whole builds, one folder per session, in /private/tmp.

How it works

It keeps watching, so you never have to go looking.

  1. Checks 81 known sources, every 15 minutes

    The places Xcode, simulators, test runners, AI agents and package managers dump files. Scans run at low priority so your builds always come first, and they pause in Low Power Mode.

  2. Leaves what you are using alone

    Each source has an age gate. Today's build, the simulator you just booted and the agent session that is still running count as in use, not junk.

  3. Cleans up when you say so

    Size, growth over the last 24 hours and what deleting each one costs. Clean up all clears what's ready to clean after one confirmation, and anything that might hold your data goes to the Trash instead.

It tells you what is safe to delete, and what to look at first.

Auto-clean

Rebuilt or re-downloaded automatically. Deleting these never loses your work.

Check first

Might hold something you still need, or cost a long download to get back. Each one says what deleting it costs, and anything that might hold your data goes to the Trash.

Auto-clean

Or let it clean up on its own.

Turn on auto-clean and you can stop thinking about System Data. It is one switch, and it stays off until you turn it on.

  • Cleans what your tools rebuild or download again on their own, after every scan
  • Keeps what you're working on: builds, simulators and caches you haven't touched for 1 day go, even before their usual wait
  • Never cleans Check first on its own, or what's costly to get back, like simulator runtimes
  • Deletes for good, so the space comes back right away, and asks once before you turn it on, since there's no undo

What it watches

81 sources across 11 categories

Each one grows forever on a dev Mac. Finding them is the easy part: before it removes anything, the app checks that nothing is using it.

13 sources

iOS Simulators

Every Xcode update adds runtimes and devices, and the old ones never leave.

  • Simulator runtimes
  • Unavailable simulators
  • Simulator screen recordings in temp folders
  • +10 more
12 sources

Xcode

Build data, device support and archives pile up with every project and iOS release.

  • DerivedData
  • Device support files
  • Archives
  • +9 more
12 sources

Temp Folders & AI Agents

AI agents, test runners and headless browsers leave scratch files, logs and VMs that nothing clears.

  • AI agent scratchpads
  • Claude Code session logs
  • +10 more
8 sources

JavaScript / React Native

Package managers keep every version they ever fetched, and test runners keep old browsers.

  • npm cache
  • pnpm store
  • +6 more
5 sources

Docker & VMs

Docker's disk image only grows: old images, stopped containers and build cache stay inside.

  • Unused Docker images
  • Docker build cache
  • +3 more
6 sources

Android

Emulator snapshots, system images and Gradle caches stay for every SDK you have tried.

  • Unused Android system images
  • Android emulator snapshots
  • +4 more
3 sources

Python & ML

Package caches keep every download, and one ML model can weigh several gigabytes.

  • pip, uv & Poetry caches
  • Conda package cache
  • +1 more
9 sources

Other Toolchains

Homebrew, Cargo, Go, Maven and Flutter keep old versions and caches forever.

  • Old Homebrew versions & downloads
  • Cargo registry & git caches
  • +7 more
3 sources

Apps & Browsers

Electron apps and browsers keep caches and AI models long after you need them.

  • Electron & Chromium app caches
  • Chrome on-device AI model
  • +1 more
4 sources

Editors & IDEs

Caches, logs and every past extension version, for each editor you use.

  • VS Code, Cursor & Zed caches
  • Old JetBrains IDE caches & logs
  • +2 more
6 sources

macOS

Local snapshots, old device backups and update downloads hide in System Data.

  • Time Machine local snapshots
  • iPhone & iPad backups
  • +4 more

Nothing in use, ever

Right before anything goes, the app checks it again. If an app has it open, a simulator runs from it or an agent is still working in it, it stays.

Not another Mac cleaner

Your agents should never stall over System Data.

You know the moment. Three agents mid-task, a build halfway through, and then everything stops: No space left on device. The simulator won't boot, Xcode can't write its index, and an agent is asking you what to do now. You open Storage settings and there it is again. System Data, swollen with files you never put there.

A Mac cleaner

  • A cleanup you run when you think of it, usually once the disk is already full.
  • Made for every Mac: browser caches, logs, big old files.
  • Sees files, not what your tools are doing with them.
  • One big sweep, then you hope nothing important went with it.

System Data Cleaner

  • Checks your disk every 15 minutes, all day, quietly from the menu bar.
  • Made for dev Macs: the 81 places Xcode, simulators, AI agents and package managers leave junk behind.
  • Leaves anything in use alone: open files, booted simulators, the agent session that's still running.
  • Auto-clean only deletes what your tools rebuild or download again on their own, and re-checks every item right before it goes.

Turn on auto-clean once. The dev junk stops piling up behind your back, your agents keep their disk space, and you get to forget System Data exists.

Light enough to run all day.

A tool that gets your disk space back should not eat it. System Data Cleaner is a native SwiftUI menu bar app. An Electron app would ship 150 MB of Chromium and idle at 150 to 300 MB of memory.

app size
< 2 MB
memory while it runs
~33 MB
between scans, adjustable
15 min
accounts, trackers or uploads
0

FAQ

Questions developers ask

What is System Data on a Mac?

It is where macOS files everything it can't put under a named category like Apps, Documents or Photos: caches, logs, temp files and Time Machine local snapshots. On a developer Mac most of it is tool output, such as Xcode DerivedData, simulators and package caches.

Why does System Data keep growing on my Mac?

Dev tools write files and never delete them. Every build, simulator launch, test run and package install leaves something behind. macOS only clears $TMPDIR when the Mac starts up, and only for items untouched for 3 days, so a Mac that sleeps instead of restarting never gets cleaned.

How do I free up System Data right now?

Use each tool's own cleanup command first: xcrun simctl delete unavailable for dead simulators, npm cache clean --force, pnpm store prune and brew cleanup --prune=all. Then delete old folders in ~/Library/Developer/Xcode/DerivedData. System Data Cleaner shows which of these are actually big on your Mac and cleans them with one click once you confirm.

Is it safe to delete Xcode DerivedData?

Yes. DerivedData is build output, and Xcode makes it again. The only cost is a slower first build. System Data Cleaner only reports DerivedData folders untouched for 1 day, so the project you are working on is left alone.

Does System Data Cleaner delete anything on its own?

Only if you turn on auto-clean, which stays off until you do and asks first, since what it deletes is gone for good. Then it deletes what your tools rebuild or download again on their own after each scan, plus any Check first sources you add. Everything else waits for your confirmation: what's ready to clean is deleted, and anything that might hold your data goes to the Trash. It never touches anything in use or anything outside your home and temp folders, and every removal is logged.

Will it slow down my Mac or my builds?

No. It scans every 15 minutes at low (utility) priority, so builds always come first, and it skips scheduled scans in Low Power Mode. The app is under 2 MB and uses around 33 MB of memory.

Does it send my data anywhere?

No. There is no account and no analytics, and only two things ever go over the network. About once a day the app asks systemdatacleaner.com whether there is a new version, sending nothing but its own version number; you can turn that off in Settings, and nothing is installed until you say so. With a license, your key goes to Polar, the store that sells it, when you activate it (with your Mac's name, so you can tell your Macs apart) and about once a week after. Reports, and the log of everything you removed, stay on your Mac in ~/Library/Application Support/SystemDataCleaner.

What about Time Machine local snapshots?

They can hold a lot of space and are often the biggest hidden part of System Data. macOS can't report their size, so the app lists them for review, with tmutil deletelocalsnapshots to remove one.

What do I need to run it?

macOS 14 Sonoma or later. It never asks for a permission: it only looks in hidden tool folders, never in your projects, Desktop, Documents, Downloads or other apps' data.

Stop hunting for System Data.

Install it once, turn on Launch at Login, and it keeps watching. You only look when the ninja in your menu bar warns that your disk is almost full.

Coming in November

The signed, notarized download arrives in November. It needs macOS 14 or later.